Posts Tagged dahdi-linux

DAHDI-Linux 2.5.0.2 and DAHDI-Tools 2.5.0.2 Released

Posted by admin in dahdi, dahdi-linux, dahdi-tools on October 22, 2011

DAHDI - Digium Asterisk Hardware Device Interface

DAHDI - Digium Asterisk Hardware Device Interface

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux 2.5.0.2 and DAHDI-Tools 2.5.0.2.

2.5.0.2 is a bug fix release. It is recommended that current users of v2.5 to upgrade.

DAHDI-Linux 2.5.0.2, DAHDI-Tools 2.5.0.2, and DAHDI-Linux-Complete 2.5.0.1+2.5.0.1 are available for immediate download at:

Issues closed by this release:

  • DAHLIN-257: wcb4xxp shows hardware EC in /proc/dahdi/* for B410P although vpmsupport=0
  • DAHLIN-260: wctdm24xxp/base.c fails to compile in 2.6.16 kernel

The DAHDI-Linux short log from v2.5.0.1 is:

Shaun Ruffell (8):

  • dahdi: Decrease the initial coretimer delay to 4ms from 1 second.
  • wctdm24xxp, wcte12xp: Advertise VPMOCT032 presence in dahdi_span.devicetype.
  • dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe regression.
  • wctdm24xxp: Set dahdi_span.devicetype string in one place.
  • wctc4xxp: Allow G723 SID frames to pass to the hardware decoder.
  • wct4xxp: Fix condition where hardware echo canceler erroneously mutes DTMF.
  • wcb4xxp: Do not show LASVEGAS2 as echocan name if vpmsupport is set to 0
  • dahdi: Move WARN_ON_ONCE from wctc4xxp driver to include/dahdi/kernel.h

Tzafrir Cohen (1):

  • xpp: fxs: bugfix for 2fxs+6fxo cards

The DAHDI-Tools short log from v2.5.0.1 is:

Shaun Ruffell (2):

  • dahdi_genconf: Assume spans with unknown term types are software selectable.
  • dahdi_genconf: Use ‘dahdi_scan’ to determine span_type for B410P cards.

And the diff stat for this release from v2.5.0.1 is:

drivers/dahdi/dahdi-base.c | 6 +++++-
drivers/dahdi/wcb4xxp/base.c | 2 +-
drivers/dahdi/wct4xxp/base.c | 2 –
drivers/dahdi/wctc4xxp/base.c | 21 ++++—————–
drivers/dahdi/wctdm24xxp/base.c | 31 +++++++++++++++++++++++——–
drivers/dahdi/wcte12xp/base.c | 8 +++++++-
drivers/dahdi/xpp/card_fxs.c | 39 +++++++++++++++++++++++++++++++——–
include/dahdi/kernel.h | 13 +++++++++++++
8 files changed, 84 insertions(+), 38 deletions(-)

and for DAHDI-Tools:

xpp/perl_modules/Dahdi/Span.pm | 37 +++++++++++++++++++++++++++++++++++–
1 files changed, 35 insertions(+), 2 deletions(-)

For a full list of changes in these releases, please see the ChangeLog at

Issues found in this release can be reported in the
DAHDI-Linux and DAHDI-Tools projects at https://issues.asterisk.org/jira

Thank you for your continued support of Asterisk!

, , , , , , ,

No Comments

DAHDI-Linux 2.4.1 and DAHDI-Tools 2.4.1 Released

Posted by admin in dahdi, dahdi-linux, dahdi-tools on March 3, 2011

DAHDI - Digium Asterisk Hardware Device Interface

DAHDI - Digium Asterisk Hardware Device Interface

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.4.1.

DAHDI-Linux 2.4.1, DAHDI-Tools 2.4.1, and DAHDI-Linux-Complete 2.4.1+2.4.1 are available for immediate download at:
http://downloads.asterisk.org/pub/telephony/dahdi-linux
http://downloads.asterisk.org/pub/telephony/dahdi-tools
http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete

2.4.1 is a maintenance release of the DAHDI drivers and tools packages. Some of the more notable changes are:

  • Support for compilation against kernel versions from 2.6.9 up to and including 2.6.38-rc6.
  • wct4xxp: PCI-express cards go through an extended reset at start by default.
  • wcte12xp, wctdm24xxp: Disable read-line multiple PCI command, which increases compatibility in some systems.
  • xpp: Fixes init error for PRI devices with < 4 ports.
  • tonezone: Add Macao, China to tone zone data.
  • dahdi_genconf: Don’t generate configurations that use channel 16 on E1 CAS.

For a full list of changes in these releases, please see the ChangeLogs athttp://svn.asterisk.org/svn/dahdi/linux/tags/2.4.1/ChangeLog andhttp://svn.asterisk.org/svn/dahdi/tools/tags/2.4.1/ChangeLog

Issues found in these release candidates can be reported in the DAHDI-linux or DAHDI-tools project athttps://issues.asterisk.org

Thank you for your continued support of Asterisk!

, , , , , , ,

No Comments

DAHDI-Linux 2.2.1, DAHDI-Tools 2.2.1, And DAHDI-Linux-Complete 2.2.1+2.2.1 Now Available

Posted by admin in dahdi, dahdi-linux, dahdi-linux-complete, dahdi-tools, vpmadt032 on January 21, 2010

DAHDI - Digium Asterisk Hardware Device Interface

DAHDI - Digium Asterisk Hardware Device Interface

The Asterisk Development Team is pleased to announce the release of DAHDI-Linux and DAHDI-Tools version 2.2.1.

DAHDI-Linux 2.2.1, DAHDI-Tools 2.2.1, and DAHDI-Linux-Complete are available for immediate download at:

These releases contain bug fixes and modifications to accommodate interface changes in Linux kernels up to 2.6.32. A few of the more noteworthy changes in these releases from the previous release are:

  • Reference counts are properly maintained on the echo canceler modules (issue#13504).
  • Better alarm debouncing for wct4xxp and wcte12xp drivers per AT&T 54016.
  • Support for extra HFC-4S and HFC-8S BRI cards in wcb4xxp.
  • dahdi_dummy will not lock up when a time-shift is detected (issue #15647).
  • T1 CAS support in the xpp “PRI” (E1/T1) module.
  • T1 CAS configuration generation support in dahdi_genconf. Default remains ISDN.
  • Much less verbose xpp firmware loading.
  • wcfxo resets DAA on initialization (issue #14232).
  • VPMADT032 firmware update to 1.20.

For a full list of changes in these releases, please see the ChangeLogs at:

Issues found in these releases can be reported at http://issues.asterisk.org

Thank you for your continued support of Asterisk!

, , , ,

No Comments

DAHDI Linux and DAHDI Tools 2.2.0 Released

Posted by admin in astribanks, dahdi, dahdi-linux, dahdi-perl, dahdi-tools, digium, hardware, vpmadt032, xorcom on June 24, 2009

DAHDI - Digium Asterisk Hardware Device Interface

DAHDI - Digium Asterisk Hardware Device Interface

The Asterisk Development Team is pleased to announce the release of DAHDI Linux 2.2.0 and DAHDI tools 2.2.0. Both releases are available for immediate download at http://downloads.asterisk.org/pub/telephony

In addition to various bug fixes, these releases include:

  • Support for new Xorcom Astribanks with the TwinStar ™ option.
  • Improved hardware echo canceler performance for Digium VPMADT032.
  • Improved fax tone detection and echo canceler / fax handling.
  • Improved timing accuracy of dahdi_dummy, including when running in virtual environments.
  • New buffering policy (DAHDI_POLICY_HALF_FULL) which can help faxing performance.
  • Fixes for Dahdi-perl for non-Xorcom hardware.
  • BRI Astribank modules no longer need the bri_dchan patch.
  • Explicit ordering of Astribanks for multi-Astribanks setups.

Please report issues found in these releases on http://issues.asterisk.org/.

For a full list of the changes in these releases, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/dahdi-linux/ChangeLog-2.2.0
http://downloads.asterisk.org/pub/telephony/dahdi-tools/ChangeLog-2.2.0

Thank you for your continued support of Asterisk!

, , , , , , , , ,

No Comments

DAHDI Linux 2.2.0-rc5 and DAHDI Tool 2.2.0-rc3 Release

Posted by admin in dahdi, dahdi-linux, dahdi-perl, dahdi-tools, digium, hardware, vpmadt032, xorcom on June 2, 2009

DAHDI - Digium Asterisk Hardware Device Interface

DAHDI - Digium Asterisk Hardware Device Interface

The Asterisk Development Team is pleased to announce the fifth release candidate of DAHDI Linux 2.2.0 and the third release candidate of DAHDI tools. Both release candidates are available for immediate download at http://downloads.asterisk.org/pub/telephony

In addition to various bug fixes, these release candidates include:

  • Support for new Xorcom Astribanks with the TwinStar ™ option.
  • Improved hardware echo canceler performance for Digium VPMADT032.
  • Improved fax tone detection and echo canceler / fax handling.
  • Improved timing accuracy of dahdi_dummy, including when running in virtual environments.
  • Fixes for Dahdi-perl for non-Xorcom hardware.
  • BRI Astirbank modules no longer need the bri_dchan patch.
  • Explicit ordering of Astribanks for multi-Astribanks setups.

Please report issues found in this release candidate on http://issues.asterisk.org/.

For a full list of the changes in these release candidates, please see the ChangeLog:

http://downloads.asterisk.org/pub/telephony/dahdi-linux/ChangeLog-2.2.0-rc5
http://downloads.asterisk.org/pub/telephony/dahdi-tools/ChangeLog-2.2.0-rc3

Thank you for your continued support of Asterisk!

, , , , , , , ,

No Comments